Click image to view full size image
Instructions for C8015-20/ZF Longitudinal Slitting Line
1. Usage
The Slitting Line is used to cut the Aluminum coil into smaller Aluminum tape with certain width and roll it all up. The whole unit adopts electromagnetism to control the speed; the cutting speed, the adjustment, and the assembly line will be all operated via control console.
2. Technical Data for Slitting Line
2.1 Material Quality: Pure Aluminum or Aluminum Alloy ( σb≦300Mpa)
2.2 Raw Material Coil
Inner Diameter: Φ300mm、Φ400mm（Increased diameter plate ）、
Φ500mm（Increased diameter plate ）
Outer Diameter: ≦Φ1400mm (Suggested Φ1200mm)
Width: 200mm~500mm
Thickness: 0.18mm~0.5mm
Weight: ≦2000kg
2.3 Coil after Slitting
Inner Diameter: Φ300mm
Outer Diameter: ≦Φ1400mm (Suggested Φ1200mm)
Weight: ≦2000kg
Slitting Lines: ≦18 strip lines (thickness 0.30mm)
Slitting Width: ≧20mm per strip
Slitting Precision: Width Tolerance: +-0.05mm
Burr: ≦0.03mm
Lateral Bending: ≦ 2mm/m
2.4 Highest Speed for the unit: ≦ 60m/min (calculated with Φ500mm )
3. Slitting Function and Specification
3.1 Main Unit
Feeding carriage, Decoiler, Safety Barrier, Slitting Roller, Coil-transfer Plate, Tension Control Unit, Coiler unit, Unload Carriage and Electrical Control System
The Site area should be Length 12000mm, Width 5100mm
E-mail: 